Trophy Ridge React Trio Pro—The End to the Multiple vs. Single Pin Debate

If you’re looking for a new bow sight, you’ve probably already done a lot of research. Don’t look any further than the Trophy Ridge React Trio Pro Sight. Keep reading to learn all about it.

Becoming a capable archer requires a whole host of skills. There are, of course, the physical demands of drawing a bow, but archers must also train their patience, coordination, ability to determine distances, and, most importantly, their focus. Without well-honed focus, an archer will miss shot after shot. And, even someone who has never used a bow knows that the point of archery is to hit a target. Fortunately, through the use of modern sights, like the Trophy Ridge Trio Pro, training your accuracy and focus has never been easier.

Bow sights come in a few varieties—single pinned and multiple pinned. If you’re in the market for a new sight, you are probably aware that there is a heated debate regarding which is the better option. Supporters of single pin sights claim that they’re more accurate because you can adjust them to exact yardages. Archers who prefer multiple pin sights claim that having a pin for each yardage makes shooting quicker since you don’t have to adjust your sight. But what if I told you that you could have the best of both worlds?

Trophy Ridge has designed an exceptional piece of equipment that blends the features of both single and multiple pin sights. The Trophy Ridge React Trio Pro stands out from other sights on the market for its unique design that lets you use multiple pins with a slider, like that of a single pin sight. In this article, we will delve into the specifications of this sight, look at what places it among the best sights, and review what buyers had to say about it. If you’re ready, let’s get started.

Trophy Ridge

Trophy Ridge is a well-known company among hunters and archers for their quality bow and hunting accessories. They’re a relatively new company compared to others, but, since joining with Bear Archery in 2007, they’ve dedicated themselves to producing the best possible products without costing the buyer an arm and a leg. Even a premium sight like the React Trio Pro won’t break your bank.

That’s not to say that Trophy Ridge doesn’t stack up against the premium lines. In fact, Trophy Ridge nearly always ranks among the Top 5 companies making bow sights. When it comes to these guys, you can virtually guarantee that, whichever one of their products you own, it has been researched and made solely for the benefit of the consumer. They’re not just going to slap a new name on the same old design and call it a day. With Trophy Ridge, you’re getting quality.

React Trio Pro Features

The Trophy Ridge React Trio Pro is an upgraded version of their older React Trio bow sight. They changed up the design to make it sleeker and lighter, as well as making a few cosmetic adjustments. Calling this sight either a single pin or multiple pin sight is a little complicated because of its design. By virtue of the fact that it has more than one pin, it can’t possibly be called a single pin sight, so we will call it a multiple pin sight.

We say that it’s difficult to label because, with your average multiple pin sight, you have anywhere from three to seven pins that you sight to a specific yard. That’s it. Once they are sighted, you don’t have to make many adjustments.

A single pin sight uses a slide with yards sighted in intervals of ten. You can slide between the settings to get an accurate yardage, but it takes more time to fire off an arrow than with a multiple pin sight. Added movement is also a significant consideration when you’re hunting and don’t want to startle your target.

To fully explain, let’s look at the optics on this sight:

Optics

Optics

The React Trio Pro features three .019 pins—two horizontal and one vertical. The two horizontal pins are meant to be sighted at 20 and 30yds. The vertical pin is sighted to be used with the slider. We will talk more about what makes the vertical pin different in the next section on adjustments.

At the point of each pin, Trophy Ridge has added an ultra-bright fiber optic to capture as much light as possible. The 20yd and 40yd pins use a neon green color, and the 30yd pin uses a blaze orange for added contrast. This will keep you from confusing your sights in the heat of the moment if you’re a hunter.

The ridge of the sight is accented with more neon green fiber optic. This will help illuminate your sight even in the shadiest patches of forest or on early autumn mornings. On the bottom of the optic, Trophy Ridge has also added a green bubble level to keep you from canting the bow left or right when you shoot.

The optics on the React Trio Pro are illuminated, and you can control the brightness using a rheostat. We must advise you to check with your local government’s regulations before making use of this feature. Certain regions do not permit you to use battery-operated accessories on bows. If you find yourself in this situation, do not worry; the battery can be removed from the rheostat to make your bow compliant with the law.

Adjustments

Adjustments

The adjustments on the React Trio Pro are probably the most impressive part of this scope. Like we mentioned up above, this sight incorporates the slider from a single-pin sight, meaning that you have to make a few more adjustments than with a typical multiple pin sight. That might make you rethink buying this sight, but do not worry. We have good news.

This sight gets its name from the advanced React technology produced by Trophy Ridge. Using their tech, you only have to sight two yardages on the slider, and the sight will do the rest for you. If you feel skeptical about this, we encourage you to try it out. The automatic adjustments are wickedly accurate. You’ll be consistently shooting out to 100yds thanks to this technology.

You are probably wondering how it works.

First, you should sight the two horizontal fixed pins. Starting at 20yds, you honestly only need to get the arrow on target. The same can be said for the 30yd pin. Next, you want to sight the vertical pin. This one needs to be as accurate as possible for the React technology to make the appropriate adjustments.

Sight the vertical pin to 40yds. Then, using the slider, go up to 60yds and sight that in. Once you’ve made the adjustments to the 60yd position, the React Trio Pro will automatically calculate the distances between the pins and set those remaining to 70, 80, 90, and 100yds. Lock your adjustments into place, and you’re good to go!

Another benefit of this sight is that the adjustments are all tool-less. You can easily make changes to your sight without having to hunt down a special tool. This will also take a few minutes off your set up process. Once you’ve sighted in your distances, you can apply the yard tape that comes with the sight. As well, the yardage indicators are illuminated and can be controlled using the same rheostat as for the optics.

Leveling

Having a level sight on your bow is incredibly important. Without a level position, your arrows will land to the left or right. This is especially true for when you are shooting from an angle. Fortunately, the Trophy Ridge React Trio Pro uses second and third axis leveling.

The second axis of your sight is basically the line you’re looking down when you aim through the sight. If this line is crooked, your shots are not going to land where you want them to. Well-functioning second axis leveling will guarantee that your arrows fly as straight as can be.

The third axis is basically a line that runs through the center of your sight from top to bottom. A lot of entry-level and even mid-level sights do not use third-axis leveling but, if you want to hunt from a tree stand or in hilly terrain, third axis leveling is essential. Good third axis leveling will keep your shots accurate even if you are shooting from a severe angle.

Construction

Trophy Ridge is aware that added unwanted weight to your bow can make it harder to aim and shoot accurately. You don’t exactly want a massive hunk of steel on the side of your bow. But, at the same time, you don’t want to go out in the woods with a sight that can’t take a bump or a scratch. With this in mind, a lot of companies build their sights out of co-polymers to cut down on weight. While co-polymer is tough, it’s not exactly the be-all and end-all of durability.

To manage the weight of this sight without sacrificing on strength, Trophy Ridge constructed the React Trio Pro using forged aluminum. It is slightly heavier than if it were built of co-polymer but only marginally. With aluminum, you get a sleek-looking design that can take a little more abuse and, overall, it only weighs about 12oz.

Overview

React Trio Pro Specifications
 

 

 

 

Optics

 

Two horizontal .019 pins

 

One vertical .019 pin

 

Neon green and blaze orange fiber optics

 

Rheostat controlled brightness

 

 

 

Adjustments

 

Tool-less adjustments

 

Slider for 40-100yds

 

React technology

 

Leveling

 

2nd & 3rd Axis leveling

 

Construction

 

All aluminum

 

Weight

 

12oz

 

Mountings

 

3 mounting positions

All in all, this sight is a total package. You are probably wondering how much this is going to cost. Third axis leveling, single and multiple pin features, advanced React technology, solid aluminum construction, and tool-less adjustments—these features generally aren’t found on inexpensive sights. Hold on to something because you’re probably going to be shocked by the price. For all of these premium features, you will only pay $212.00. Yes, that is more than you would pay for an entry sight but, this is no entry sight.

If you don’t take our word for here, listen to what the buyers had to say

User’s Opinions

The React Trio Pro has a 4.2 rating out of 5 stars, with over half of all users rating it five stars. Buyers widely commented on three main points—how easy it is to set up the sight, the pinpoint accuracy of the sight, and the bargain price with premium quality. Many buyers were also impressed with the sight’s image, commenting that it was easy to see in low light, and there was no haze in direct overhead light.

Of course, buyers had their reservations about certain things. For instance, the React Trio Pro only comes in a right-hand option. If you are a left-handed archer, you will not be able to make use of this product. Also, the sight does not come with written instructions. We advise that you look on Trophy Ridge’s website for a video on set up.

The only other complaint about this sight is that you have to be a proficient archer at 60yds. If you don’t feel comfortable making a 60yd shot, you won’t get the full benefit of the slider.

PROS:
  • Unique three-pin design using a slider
  • React technology for easy adjustments
  • 2nd and 3rd axis leveling
  • Rheostat controlled brightness
  • Tool-less adjustments
  • Sturdy aluminum construction
CONS:
  • No left-hand option
  • Cannot attach a lens
  • Does not come with written instructions
  • Not an entry-level sight

Conclusion

If you are looking to buy a new bow sight, but you’re not sure if you should opt for a multiple pin or a single pin sight, why fret over the two? With the React Trio Pro from Trophy Ridge, you get all the benefits of both styles. Thanks to a unique design, you can accurately sight target up to 100yds, landing shots you never thought you would make. Keep in mind, though, that no one piece of equipment is going to make you a perfect shot. This isn’t an entry-level sight, so you will need to practice using it first. But, once you’ve gotten used to the design, we can guarantee that you’ll be happy with the purchase of a React Trio Pro. Hopefully, this article has given you some insight into bow sights and helped to guide you in your purchase. Now get out there are shoot some arrows!

SIGN UP TO KEEP IN TOUCH!

Leave a Reply

Your email address will not be published. Required fields are marked *