Ruger Precision Rifle 6.5 Creedmoor Review

Do you want to know about Ruger’s Precision Rifle? In this article, we will give you a complete Ruger precision rifle 6.5 Creedmoor review and how it will be helpful for you.

They created quite a stir when it was first revealed. As a technology man by day.

We normally cringe when we hear buzzwords like “paradigm shift,” but when it came to Ruger’s newest gun, you had to dig deep to find language to express what they’d done.

On paper, you have a highly adaptable platform chambered in three capable, long-range, fast-action cases that make the most of the AR-15’s already booming aftermarket. Check Price

Regardless of flavor, the RPR is very customizable, modular, and useful. And, although it is acceptable, let’s not dance around the matter. 

So, after we were given the go-ahead to have one delivered to us, we knew we’d either be ecstatic or disappointed.

In my experience, a precision rifle is what your non-gun buddies could refer to as a sniper rifle. 

This year’s Bushnell Brawl line was nearly entirely made up of bolt action weapons based on the Remington 700 action layout.

Others employed more classic free-floated stores with flat for ends and bipods in the front and high cheek combs in the rear.

These stocks allow the barrel to stay intact while still providing a steady firing platform off of barricades and bags. 

Traditionally, these rifles have been chambered in 6mm or 6.5mm calibers. For the 6.5s, the most well-known ones we saw at the Brawl were the.260 Remington, 6.5 Creedmoor, and 6.5 x 47 Lapua, and for the 6s, the.243 WIN and 6XC.

Common Features:

Ruger rifle 6.5 offers you the greatest features. The most common feature shared by all of these guns is that they all fire a bullet in almost the same spot, whether it’s hot, cold, clean, or filthy. 

Hand-lapped premium barrels with somewhat thick contours coupled to sophisticated, squared receivers are frequently used to achieve this degree of precision.

These weapons are tack drivers that err on the side of hefty chambered cartridges that send bullets reliably at distances of up to 1000 yards. 

They’re highly “shootable” guns, which is what makes them so wonderful.

A pair of front and rear bags may be used to make almost any rifle fire effectively. 

When you get the same gun to fire well offhand or from the weak side when positioned on a dangerous barrier, the tale alters significantly. 

The final thing these weapons have in common? They cost anything from a few thousand dollars to tens of thousands of dollars.

Better Late Than Never:

If you deal with weapons, the Ruger precision rifle 6.5 Creedmoor, and modern Ruger goods in general, will stand out since they don’t attempt to nickel and dime you.

Ruger provides two magazines and a QD stud on a Picatinny rail so you may use a conventional Harris bipod or one with a Picatinny adapter.

We utilized a Nightforce 8-32x56mm NXS is a Spur mount on our RPR (both are available through Borewells).

After having the Ruger precision rifle 6.5 Creedmoor review. The greatest scope in what is, without a doubt, the greatest scope mount ever made. 

Results we get with this weapon will accurately reflect its capabilities and will not be ascribed to a poor optic or mount

Getting Behind the RPR:

After settling down behind the RPR, we began modifying the rear buttstock to fit ourselves.

The stock weld and length of the draw of folding stock, on the other hand, are two traits we feel every precision rifle should have.

Each adjustment is controlled by a cam coupled to a lever. A knob on the other side of the cam may be used to alter the amount of force required to shut it. 

With this approach, adjustments may be done quickly and simply. While many RPR owners upgrade to MAGPUL RRP stocks, we believe the stock that comes with the weapon is sufficient.

Ruger precision rifle 6.5 Creedmoor folds to enable the bolt to be removed. This, in our view, is a crucial aspect. 

All too frequently, precision rifles need disassembly and removal of components in order to remove the bolt, examine the bore, or boresight the old-fashioned way by staring down the tube.

The RPR’s trigger has a blade-type safety, similar to the Savage AccuTrigger. The trigger pull averaged 2 pounds, 11.5 ounces over five pulls.

While it doesn’t have the same aesthetic appeal as a handmade aftermarket trigger like the Timney, the motivation is much better than most factory triggers.

The Three-Lug Bolt Has a Short, 70-dDegree Throw:

The expanded knob, on the other hand, is conveniently situated near the trigger. It is, in our view, at the greatest place for quick manipulation of the bolt.

Although the Ruger precision rifle 6.5 Creedmoor review, this scope is fairly pricey (about $1,000), precision rifles are quite affordable. 

Read More: Best AR 15 Scopes Under budget

Molded plastic and MIM steel components will be used to achieve this price point. 

The finest illustration of this is the “firing pin back” that looks extremely similar to the Ruger American, and we think it is the same component.

The RPR Uses AICS Style Magazines:

When the magazine is empty and the bolt is racked to the rear, the magazine follower keeps the bolt open, preventing the bolt from closing on an empty chamber.

Despite the fact that it comes with two MAGPUL magazines. Individually loading rounds into the RPR is tough as a result of this. 

The RPR bolt may shut on an empty magazine without pulling the follower down when using a regular metal AICS type magazine.

Shooting the RPR:

We went to the range with 19 different hand loads (H4350 and Varget) and four different bullets (Hornady 147 ELD M, Sierra 142 SMK, Lapua 120 Scenar-L, and Sierra 107 TMK loaded over Starline brass).

We’ll be writing a series of articles on the performance, including one on Ruger Precision Rifle Loading, which will be out soon.

In the meanwhile, despite the Ruger precision rifle 6.5 Creedmoor very thin factory barrel shank, we must admit that it worked well.

The lowest of the nineteen 5-shot 100-yard groups measured.521′′, averaging.878′′ (.839 MOA). (.498 MOA) (.498 MOA) (.498 MOA)

Technical Specifications:

Model Number18029
Caliber6.5 
Creedmoor Stock Folding Adjustable Length of Pull and Comb Height
Barrel Length 24″
Barrel Cold Hammer-Forged 5R Rifling
Twist 1:8″ RH
Grooves5
Weight10.7 lb
Capacity10
Height7.30″
Overall Length43.25″-46.75″
Length of Pull12″ – 15.50″
Folded Length35.60″
Width3.30″

Frequently Asked Question:

Q1: How accurate is the Ruger precision 6.5 Creedmoor?

A: Starting with the folding buttstock, it’s clear that Ruger gathered a group of experts in the field of shooting rifles, locked them in a room, and wouldn’t let them leave until they created something new and more relaxing. The folding mechanism is quite sturdy and dependable.

Q2: IS  the Ruger precision rifle any good?

A: It is clear from the Ruger precision rifle 6.5 Creedmoor review that the Ruger Precision Rifle is a highly accurate, cost-effective, and competent weapon. 

However, the OEM cold hammer-forged 4140 chrome-moly steel barrel advertises sub-minute angle accuracy. 

We can attest to Rutgers’s accuracy claims after firing over 1000 rounds into the solid steel barrel.

Q3: How far will a 6.5 Creedmoor kill a deer?

A: Almost a thousand yards: At 1000 yards, the 6.5 mm Creedmoor has enough energy to kill a deer. whether the shot is well placed

Q4. What range does a 6.5 Creedmoor shoot?

A: Approximate length: 1,150 yards: The 6.5mm Creedmoor’s ability to maintain velocity keeps it in the supersonic range with 140-grain competition bullets out to 1,150 yards (1,052 m). 

In contrast, the.308 Winchester has a supersonic range of around 975 yards when using non-ideal for long-range usage 168-grain match bullets (892 m).

Final Verdict

In this article, we have given you a Ruger precision rifle 6.5 Creedmoor review which will be very helpful for you.

This is the finest post to read if you’re seeking a rifle sight for hunting or deer hunting. In this article, we’ll go over the Ruger Precision Rifle in 6.5 Creedmoor in depth.

All of these weapons have the capacity to put a bullet in the exact same spot, whether it’s hot, cold, clean, or filthy.

Hand-lapped premium barrels with rather substantial contours mated to head, squared receivers are frequently used to achieve this degree of precision.

These guns are tack drives mounted on the side of hefty chambered cartridges that can efficiently deliver bullets up to 1000 yards.

Read More: How to Mount and Sight a Rifle Scope