How to Clean Your Rifle Scope Without Damaging the Lens

How to Clean Your Rifle Scope Without Damaging the Lens

Since the days of yore, sport optics lenses have gone a long way. Permanent and abrasion-resistant lens coatings are available. However, there are certain restrictions.

Additional coatings may cause water to bead up, preserving picture quality even while it’s raining.

There’s no disputing that dried-up particles of dirt, fingerprint smudges, and even gun-cleaning chemicals and powders can wreak havoc on your picture clarity, scope longevity, and sanity when it comes to scope lens cleaning.

Here’s how to clean your rifle sight lens properly so it doesn’t end up looking like a car windshield! We also suggest a few different rifle scope lens cleaning kits.

Why Clean a Rifle Scope?

Your rifle scope was almost certainly built with the most robust frame, the most durable scratch-proof coatings, and lens covers – everything you’ll need to face the wilderness.

You’ll most likely expose the lenses to pollutants that you don’t want to remain on them for long throughout your trip. 

Dust and dirt will not harm your lenses; it is the rash decisions you make in a rush that will. That’s why there’s a good method and a bad way to clean them. When you’re tempted, here are all the things you shouldn’t do!

Wipe the lenses with your shirttails, not your shirttails. It isn’t made for lenses and includes abrasives that will damage your coatings.

Don’t wipe your nose with your snotty handkerchief. You have no idea what extra germs you’re introducing to the glass, and you’re just ensuring that a more thorough cleaning will be required.

When wiping off moisture, don’t use your sleeve. In this case, a little planning ahead of time will save your time and money.

Cleaners should not be sprayed directly on the lenses. Over time, the seals on your sight may be damaged.

However, this isn’t a comprehensive list of the dumb things we do when we’re desperate. However, it gives you an idea of what not to do if the situation arises.

Preventative Care: Use Lens Caps

Preventative Care Use Lens Caps

This is a broad statement. When you’re not using your scope, keep your caps on. This is true for gun storage, cleaning, and even field usage. 

When slogging through wood, twigs, branches, and other debris come into contact with the glass-to-air lenses as you are innocently walking through bush or lifting your scope up off the ground, exposed glass may be broken.

Keep your caps on when cleaning your weapon. Even if you wipe the solvents and powders off the lenses immediately away, many gun cleaning chemicals and powders may cause irreversible damage.

Over time, those minute droplets and threads may do a lot of damage, making your scope unusable – bummer! It will go a long way if you keep your hats on!

If you are looking for a Good Scope read Nikon M 308 Review

Polishing:

Polishing

You’re probably ready to take your cleaning skills to a whole new level of polishing after brushing off any loose dust and grime particles. 

Eyelash oil stains, fingerprint smudges, dried water spots, and other annoyances that need a bit of extra elbow grease may often be difficult to remove with only a short brush. 

You may still get rid of those pesky imperfections without exerting any effort.

A lens pen that is used for dusting may also be used for polishing. Additionally, most lens pens come with a non-liquid cleaning solution that can generally handle these difficult-to-clean areas. 

A microfiber chamois pad on the other end of the dusting brush may get into the corners, crevices, and grooves where the lens meets the scope of housing.

You may also use the microfiber cleaning wipes that are included with your rifle scope purchase. See Weaver kaspa Scope

They’re reusable, long-lasting, and effective and safe on coated lenses for a long period. 

You may also use a q-tip wrapped around the towel to get into those hard-to-reach places. 

Microfiber towels developed specifically for lenses catch and remove greasy residue and tiny particles.

Liquid Cleaners:

Chemical cleaners are seldom used to complete the task. You’re usually good to go with the lens pens, brushes, and clothing. 

When dealing with tough stains, a few drops of clean water may assist, but when dealing with tree sap, blood, or powder blow-back, you’ll need something a little more difficult.

For those persistent boogers, a lens cleaner solution or even an anti-fog cleaning solution may work miracles. 

An anti-fog solution may also prevent condensation from forming when the weather changes dramatically or while you’re transferring heat from your face to your optic. 

Here are a few pointers to keep in mind before spraying and wiping.

Turret Care:

Turret Care

However, it’s easy to overlook the importance of maintaining your turrets. If you reside in a chilly climate, you’re well aware that moisture and rust may cause damage to your turrets. 

Remove your turret caps after a hunt to let them air out, then dust them off the same way you cleaned the dirt and debris off your glasses. 

Brushing dirt into the spinning components of the turret mechanics is not a good idea.

Final Verdict:

Depending on the scope’s quality, various types of glass are used to make the lenses. The glass, on the other hand, is a hard substance. 

By touching it with an abrasive, it is readily damaged. Our clothing collects microscopic silica particles that are blown about in the air.

Fine scratches may be made by wiping a piece of glass with a piece of fabric that has silica embedded in it. 

When looking through the scope, these tiny scratches on the lens may cause a cloudy or fuzzy region, obstructing your vision of the target.

We’ll go over some of the most essential methods to clean your lenses in this post.